How to maintain the high speed braiding machine from China manufacturer

The maintenance and inspection content of the high speed braiding machine from China manufacturer :
1. Check whether the lubricating oil in the chassis of the high speed braiding machine from China manufacturer is within the specified range. Pick up the oil detection rod and lower it to ensure that the oil volume is in the center of the two lines but not too much, to avoid the lubricating oil spraying outside.
2. Check the lubricating oil of the turbine box, which can be visually inspected by the oil mirror. When the oil mirror is lower than half of the oil mirror, the lubricating oil needs to be supplemented.

3. All transmission gear parts of the high speed braiding machine from China manufacturer should be lubricated and maintained in an appropriate amount and maintained once a week.
4. The polished rod part of the polished rod cable arrangement should be properly lubricated and maintained, and maintained once a week.
5. It must be confirmed that there are no obstacles within the operating range of the high speed braiding machine from China manufacturer, and it must be checked at any time.
6. Tighten the screws of the transmission parts and connecting parts of the machine to avoid loosening and affecting the operation of the braiding machine, and check it once a week.
7. Before operating the high speed braiding machine from China manufacturer, please let the high-speed knitting machine run at low speed for about 5 minutes and then increase the speed.