The manufacturer of High speed braiding machine will take you to know: What are the problems that are prone to occur in the work of braiding machine

The manufacturer of High speed braiding machine tells you that anyone who has used braiding machine equipment knows that this is a machine that is widely used in braiding, and the effect is very good, but there will be some problems when using this equipment to work. Questions, specific details, High speed braiding machine manufacturers can give you a brief introduction, if you want to know, you can take a look.

1. The density of the braided layer of the braiding machine does not meet the requirements
cause:
1. The manufacturer of High speed braiding machine tells you that the number of spindles, the number of spindles, and the diameter remain unchanged. The more the pitch braiding angle, the larger the common problems and troubleshooting methods of braiding machines, and the lower the braiding density;
Solution:
1. Keep the number of spindles, root type and diameter weaving pitch and weaving angle coordinated with each other. 2. The manufacturer of High speed braiding machine tells you that because the braiding density is related to the number of braiding spindles, the number and diameter of each spindle, the pitch, and the weaving angle; check the braiding pitch and braiding angle, adjust in time if there is a problem, and check whether there are missing roots or missing roots. Strands and small diameters should be supplemented or replaced in time.
2. The density of the braided layer of the braiding machine is uneven, and the elasticity of the strands is different
Cause: the tension of the braiding machine strands is out of control;
Solution: The manufacturer of High speed braiding machine tells you to replace the elastic spring lost due to long-term fatigue and adjust the tension of each strand.
Third, the weaving pitch of the braiding machine is uneven
Cause: The number of cable turns on the traction wheel is too small, resulting in instability of the sliding spindle speed and the traction line speed, which must be matched.
Solution: The manufacturer of High speed braiding machine tells you to appropriately increase the number of laps of the cable on the traction sheave and adjust the speed between the two to stabilize.
Here is an introduction to everyone, if you don’t know it well, you can take a look, maybe it will be of great help to you! If you are interested, you can take a look, I hope it will be helpful to you.