What are the precautions for the operation of the elastic bandage needle loom from China

In order to ensure the safety of the elastic bandage needle loom from China during operation, it is necessary to operate the bandage loom correctly and reasonably. The following is a detailed introduction to the specific operation process of the elastic bandage needle loom, hoping to help everyone.
1. Make a special ground wire to make it well grounded, and completely connect the ground wire post on the back panel of the elastic bandage needle loom from China to the ground wire.

2. Put the fluff into the flocking nozzle and fasten the mesh cover. Note: Before starting the elastic bandage knitting machine, the flocking nozzle should be placed on an insulating object or a non-metallic bracket, and kept away from other surrounding objects to avoid short circuit. During the use of the elastic bandage needle loom from China, the flocking nozzle should not face the human body, and the middle and rear part of the nozzle should be held by hand.
3. Insert the power plug into the power socket, and insert the foot switch plug of the elastic bandage needle loom into the foot switch socket, and the connection should be firm.
4. Turn on the main power switch of the elastic bandage knitting machine, and observe whether the power indicator light is on, if everything is normal, then proceed to the next step.
5. Step on the foot switch of theelastic bandage needle loom from China. If you can hear the sound of high-voltage discharge, it means that the machine is in normal condition. Put on insulating gloves and insulating rubber boots for flocking work. 
6. The voltage should be adjusted according to the actual needs when working. After stopping flocking, first release the foot switch, and then cut off the power supply of the elastic bandage needle loom from China.