How to maintain the high speed braiding machine

The high speed braiding machine has a complete set of N-color automatic conversion device, and is driven by a computer-controlled motor to automatically switch between the yarn feeders, making the knitting of multi-color patterns simple and easy. The high-performance knitting action of high speed braiding machine can easily complete the high-quality pattern knitting that can only be done on a large-scale computer knitting machine.

The maintenance work of high speed braiding machine is mainly divided into three parts. The first part is that it needs to be maintained before work. Before starting the high speed braiding machine, we need to confirm that the machine is in good condition. If there is a problem with the machine, and in this case, we still use the machine. This will not only make the quality of the product bad, but also make the original The high speed braiding machine that has already experienced problems bears greater losses, making its problems more serious. Therefore, its maintenance work should not only be carried out when it is running, but it should be paid attention to before running it.
During coarse adjustment, put the spindles on the two adjacent outer spindle supports, and guide the braided thread to the braided point through the pendulum rod and stack it tightly. When the braided thread enters or exits from the slot on the track of the sliding turntable, the distance from the edge of the upper spindle sliding frame must be substantially equal. The adjustment of the distance can be realized by changing one or several gears of the gear carrier forward or backward. If the precise adjustment distance cannot be achieved by moving one tooth, the fine adjustment can be carried out according to the following steps: loosen the five fixing screws on the inner gear ring. Since the through hole is elliptical, moving the inner gear ring can realize the fine adjustment of the sliding frame. Tighten the screws after adjusting in place. Place the rest of the sliding frames evenly on the sliding ring track. If the swing height of the braided line of the new swing rod is different after installation, it should be adjusted so that all the swing rods have the same stopping point.
The high speed braiding machine is characterized by high knitting efficiency, complete functions, good knitting quality, and a wide range of knitting patterns. The use of high speed braiding machine can greatly improve the quality of knitted garments. The needle selection principle is the same, the needle selection system, but in the pattern recognition and the transmission of pattern information, part of the conveying and reading parts of the pattern board is replaced by a computer-controlled electromagnet.